MOTOLIFE N5+ Firmware MT6580 Flash File Read Cm2

MT6580__alps__N5+__best6580_weg_l__5.1__ALPS.L1.MP6.V2.19_BEST6580.WEG.L

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A48344732611101000324969283
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , a2G4
[eMMC] : FLASH_CID : 90014A48344732611101000324969283
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xE5974B4A85C577299DA513C16625D9BA
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : alps
ProdName  : full_best6580_weg_l
ProdModel : N5+
Device    : best6580_weg_l
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2.19_BEST6580.WEG.L

[Read Ok] : preloader_best6580_weg_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / best6580_weg_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1274 MiB
Scatter saved to : C:\Users\babu\Desktop\read file\MT6580__alps__N5+__best6580_weg_l__5.1__ALPS.L1.MP6.V2.19_BEST6580.WEG.L\

All done!

Done!
Elapsed: 00:06:58
Reconnect Power/Cable!

Download Here

Whatsapp+IMO-00971551644035

Skype - dusto_babu

How to Flash Stock Firmware ROM (Flash File)

Step 1: Download and extract the firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.

Important Notes: Take a Backup of your mobile data before flashing or installing the firmware on your smartphone. As this will help you to recover the data whenever any thing wrong happens to your mobile.

iPhone 7 Clone Firmware MT6580 Flash File Read Cm2

MT6580__alps__MN8J2ZPA__iPhone7__5.1__ALPS.L1.MP6.V2.19_BENRUI6580.WE.L_P2

Wait for phone...
Phone found! [ 25 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 8801034E43617264203914348E5673A1
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E43617264203914348E5673A1
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]
DEV RID    : 0xE5974B4A289E33410AEDFA025971100E
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : alps
ProdName  : iPhone7
ProdModel : MN8J2ZP/A
Device    : iPhone7
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2.19_BENRUI6580.WE.L_P2

[Read Ok] : preloader_benrui6580_we_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / benrui6580_we_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1389 MiB
Scatter saved to : C:\Users\babu\Desktop\read file\MT6580__alps__MN8J2ZPA__iPhone7__5.1__ALPS.L1.MP6.V2.19_BENRUI6580.WE.L_P2\

All done!

Done!
Elapsed: 00:08:09
Reconnect Power/Cable!

Download Here

Whatsapp+IMO-00971551644035

Skype - dusto_babu

How to Flash Stock Firmware ROM (Flash File)

Step 1: Download and extract the firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.

Important Notes: Take a Backup of your mobile data before flashing or installing the firmware on your smartphone. As this will help you to recover the data whenever any thing wrong happens to your mobile.

Sico SSD-1-53-13M Firmware MT6735 Flash File Read Cm2

MT6735__Sico__SSD-1-53-13M__malata6735_65c_l__5.1__ALPS.L1.MP3.V2_MLT6735.65C.L1_P45

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 510001154D333238923D00428F3DF6E0
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM328
[eMMC] : FLASH_CID : 150100513832334D42003D92E0F6A28F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xE5974B4ABAD14679C075E45268946180
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Sico
ProdName  : full_malata6735_65c_l
ProdModel : SSD-1-53-13M
Device    : malata6735_65c_l
AndroidVer: 5.1
MTKxCPU   : MT6735
MTKxPRJ   : ALPS.L1.MP3.V2_MLT6735.65C.L1_P45

[Read Ok] : preloader_malata6735_65c_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6735 / V1.1.2 / malata6735_65c_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2187 MiB
Scatter saved to : C:\Users\babu\Desktop\read file\MT6735__Sico__SSD-1-53-13M__malata6735_65c_l__5.1__ALPS.L1.MP3.V2_MLT6735.65C.L1_P45\

All done!

Done!
Elapsed: 00:14:32
Reconnect Power/Cable!

Download Here

Whatsapp+IMO-00971551644035

Skype - dusto_babu

How to Flash Stock Firmware ROM (Flash File)

Step 1: Download and extract the firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.

Important Notes: Take a Backup of your mobile data before flashing or installing the firmware on your smartphone. As this will help you to recover the data whenever any thing wrong happens to your mobile.

Hotwav Cosmos V4 Firmware Blank camera Recovery Done SP7731 Flash File Read Cm2

Death Phone Hang Logo, Done

Blank camera Recovery Done

Blank LCD Recovery Done

100% TESTED

SP7731GEA_K11_QHD_ZX_64_8_scx35_sp7731gea_k11_qhd_zx_64_8_5.1_LMY47D_release-keys_Cosmos_V4.pac

Model Name  : sp7731geaplus_k11_qhd_zx_64_8_dt
Model Brand : HOTWAV
Model Device: scx35_sp7731gea_k11_qhd_zx_64_8
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_K11_QHD_ZX_64_8
Project Ver : LMY47D release-keys
Model Ext   : Cosmos V4

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_540x960.bin
[Read Ok] : fblogo_540x960.bin
[Read Ok] : thirdlogo.bin
[Read Ok] : forthlogo.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1548 MiB
Saved to : C:\Users\babu\Desktop\read file\SP7731GEA_K11_QHD_ZX_64_8_scx35_sp7731gea_k11_qhd_zx_64_8_5.1_LMY47D_release-keys_Cosmos_V4\
Done!

Elapsed: 00:30:39

Reconnect Power/Cable!


Operation : Convert InfinitySC to SPRD PAC [ v1.24 ]

Target : SP7731GEA_K11_QHD_ZX_64_8_scx35_sp7731gea_k11_qhd_zx_64_8_5.1_LMY47D_release-keys_Cosmos_V4
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731g_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[ADD FILE] : logo_540x960.bin
[ADD FILE] : fblogo_540x960.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0017
Sign PAC ...
Sign Ok! FW compiled!
Elapsed: 00:04:30

Saved to : SP7731GEA_K11_QHD_ZX_64_8_scx35_sp7731gea_k11_qhd_zx_64_8_5.1_LMY47D_release-keys_Cosmos_V4.pac
Done!

Download Here

Flash Tool Download Here

Whatsapp+IMO-00971551644035

Skype - dusto_babu

How To Flash:
its a PAC flash file Read With CM2 Box and you can flash it with CM2 box only.
Open the CM2SPD Tool.
Select CPU Boot Which supports you mobile phone.
Click flash button and Select Pac option.
Browse file which’s name is (SC77xx_FLASH_CONF.pac)
Now click flash button
Plug-in the USB cable to phone to connect it to your PC.
The process will be started,
Wait for a few minutes Till Your Device Restarted.

its Done enjoy

Important Notes: Take a Backup of your mobile data before flashing or installing the firmware on your smartphone. As this will help you to recover the data whenever any thing wrong happens to your mobile.

Magnus bravo z25 Firmware MT6580 Flash File Read Cm2

MT6580__Z25__Z25__Android__5.1__ALPS.L1.MP6.V2_BIRD6580.WEG.A.L

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100463732324D4200D4EACE99337F
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM227
[eMMC] : FLASH_CID : 150100463732324D4200D4EACE99337F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xE5974B4A4E0208AD792D0902D78CDE9F
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Z25
ProdName  : bravoZ25
ProdModel : Z25
Device    : Android
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_BIRD6580.WEG.A.L

[Read Ok] : preloader_bird6580_weg_a_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / bird6580_weg_a_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1463 MiB
Scatter saved to : C:\Users\babu\Desktop\read file\MT6580__Z25__Z25__Android__5.1__ALPS.L1.MP6.V2_BIRD6580.WEG.A.L\

All done!

Done!
Elapsed: 00:08:39
Reconnect Power/Cable!

Download Here

Whatsapp+IMO-00971551644035

Skype - dusto_babu

How to Flash Stock Firmware ROM (Flash File)

Step 1: Download and extract the firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.

Important Notes: Take a Backup of your mobile data before flashing or installing the firmware on your smartphone. As this will help you to recover the data whenever any thing wrong happens to your mobile.

Hotwav venus x19 Firmware SP7731 Flash File Read Cm2

SP7731CEB_T13_X164_HOTWAV_64_4_scx20_sp7731ceb_t13_x169_hotwav_64_4_5.1_T13_HOTWAV_USER_2SIM_64+4_B1_A5_20161117_Venus_X19.pac


Operation : Convert InfinitySC to SPRD PAC [ v1.24 ]

Target : SP7731CEB_T13_X164_HOTWAV_64_4_scx20_sp7731ceb_t13_x169_hotwav_64_4_5.1_T13_HOTWAV_USER_2SIM_64+4_B1_A5_20161117_Venus_X19
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731C_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
[ADD FILE] : logo_480x854.bin
[ADD FILE] : fblogo_480x854.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : oem.img
[ADD FILE] : sysinfo.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0019
Sign PAC ...
Sign Ok! FW compiled!
Elapsed: 00:02:57

Saved to : SP7731CEB_T13_X164_HOTWAV_64_4_scx20_sp7731ceb_t13_x169_hotwav_64_4_5.1_T13_HOTWAV_USER_2SIM_64+4_B1_A5_20161117_Venus_X19.pac
Done!

Download Here

Flash Tool Download Here

Whatsapp+IMO-00971551644035

Skype - dusto_babu

How To Flash:
its a PAC flash file Read With CM2 Box and you can flash it with CM2 box only.
Open the CM2SPD Tool.
Select CPU Boot Which supports you mobile phone.
Click flash button and Select Pac option.
Browse file which’s name is (SC77xx_FLASH_CONF.pac)
Now click flash button
Plug-in the USB cable to phone to connect it to your PC.
The process will be started,
Wait for a few minutes Till Your Device Restarted.

its Done enjoy

Important Notes: Take a Backup of your mobile data before flashing or installing the firmware on your smartphone. As this will help you to recover the data whenever any thing wrong happens to your mobile.

Mtouch Rox 1 Firmware MT6735 Flash File Read Cm2

MT6735__MTOUCH__Rox_1__x5601_otd_mtouch_rox1__5.1__ALPS.L1.MP3.V2_RGK6753.65U.L1

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 520001154D423132212406429B35D6E4
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMB12
[eMMC] : FLASH_CID : 150100523231424D42062421E4D6929B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID    : 0xE5974B4ACF8E87F2ADB62ED1F68F005D
INT RAM    : 0x00020000
EXT RAM    : 0xC0000000 [3 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : MTOUCH
ProdName  : x5601_otd_mtouch_rox1
ProdModel : Rox 1
Device    : x5601_otd_mtouch_rox1
AndroidVer: 5.1
MTKxCPU   : MT6735
MTKxPRJ   : ALPS.L1.MP3.V2_RGK6753.65U.L1

[Read Ok] : preloader_x5601_otd_mtouch_rox1.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6753 / V1.1.2 / x5601_otd_mtouch_rox1 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2361 MiB
Scatter saved to : C:\Users\babu\Desktop\read file\MT6735__MTOUCH__Rox_1__x5601_otd_mtouch_rox1__5.1__ALPS.L1.MP3.V2_RGK6753.65U.L1\

All done!

Done!
Elapsed: 00:07:41
Reconnect Power/Cable!

Download Here

Whatsapp+IMO-00971551644035

Skype - dusto_babu

How to Flash Stock Firmware ROM (Flash File)

Step 1: Download and extract the firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.

Important Notes: Take a Backup of your mobile data before flashing or installing the firmware on your smartphone. As this will help you to recover the data whenever any thing wrong happens to your mobile.